Yokogawa Button Operated DX2000 Manual de usuario descargar pdf (Pagina 134)

4-1

IM 04L41B01-62EN

Index

Communication with DX Recorder

Chapter 4 Communication with DX Recorder

4.1 Receiving Display Data from DX Recorder

If screen data (custom display data) is received from the DX recorder via

communications, it is reflected on DAQStudio.

If the Batch function is MultiBatch, the Batch/Group list page appears in the work area,

and the Group list page is not displayed.

If the Batch function is Off or On, the Group list page appears in the work area, and the

Batch/Group list is not displayed.

When receiving screen data from the DX recorder, the Channel/alarm list page is

displayed in the work area.

If the DX includes the /AS1 option, set up the DX in advance as follows. (In the example

of setting up the DX below, the user ID is not set.)

DX main unit (with /AS1 option) settings

Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic

setting mode), and select the Environment tab > Security > Communication, and set

Select the Menu tab > User registration > Admin settings > Mode, set [Key+Comm],

enter the user name, and return to the operation screen.

If a password is set, this concludes the setup. If no password set, perform the following

additional steps.

Press FUNC, select Admin1, then press DISP/ENTER.

Skip the user ID and select ENT.

Enter Admin1 for the password, then select ENT.

Enter a new password (between 6 and 20 alphanumeric characters, no spaces

allowed), then select ENT.

Reenter the new password and select ENT.

Procedure

Select Communication > Receive.

“Receive” dialog box appears.

Enter the DX recorder’s IP address and host name, and the user name, user ID,

and password.

IP address/Host name: Up to 64 single-byte alphanumeric characters can be entered. The

initial setting is “admin.”

User name:

Up to 20 alphanumeric characters can be entered.

User ID: Up to 8 alphanumeric characters can be entered.

Password: Up to 20 single-byte alphanumeric characters can be entered.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 144 145

Sin comentarios

Yokogawa Button Operated DX2000 Manual de usuario Pagina 134