Yokogawa YFGW610 Manual de usuario descargar pdf (Pagina 20)

<B1. System Installation Specications>

B1-1

IM 01W02D02-01EN

Part-B. Installation

This section describes the installation of YFGW610.

Use YFGW610 in the following procedure.

1. Installation of YFGW610

2. Wiring of the power supply, ground and network cable

B1. System Installation Specications

The system must be installed in an appropriate environment to ensure stable system operation.

The following denes the detailed specications of YFGW610 installation environment.

Table B1-1 System installation specications

Item Specications

Applicable stand-

ards

Ambient

temperature

Operating

-40 to 65°C (at altitude below 2000

meters)

-40 to 55°C (at altitude between 2000

and 3000 meters)

Transport /storage -40 to 85°C

Ambient humidity

Operating 5 to 95% relative (without condensing)

Transport /storage 5 to 95% relative (without condensing)

Temperature

gradient

Operating Within +/-10°C per hour JEIDA 29 Class B

Transport /storage Within +/-20°C per hour

Protection class IP20 IEC529

Vibration resistance

0.15 mm P-P (5 to 58 Hz)

IEC68-2-6

1 G (58 to 150 Hz)

Impact resistance

15 G, 11 msec (no conductive, and 3-di-

rection half sine waves)

IEC68-2-27

Altitude

Up to 3000 meters (due to restricted

ambient temperature)

Noise level

Electric eld 3 V/m or less (80 MHz to 1 GHz)

Electrostatic

discharge

4 kV or less (contact discharge), 8 kV or

less (aerial discharge)

Grounding Class D grounding (100 ohms or less)

Cooling Natural cooling

Mounting Mounted on DIN rails

Power supply

Voltage range 10.8 to 26.4 V DC

Rated voltage 24 V DC

Allowable ripple Less than 1% p-p

Power consumption 10 W

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

Comentarios a estos manuales

Sin comentarios

Yokogawa YFGW610 Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Yokogawa YFGW610