Yokogawa Data Acquisition with PID Control CX2000 Manual de usuario Pagina 92
- Pagina / 321
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
3-12 IM 04L31A01-17E
Selecting the Parity Check
9. Use the arrow keys to move the cursor to the [Parity] box.
10. Press one of the soft keys from [Odd] to [None] to select the parity.
Selecting the Handshaking
(This setting is valid only for the RS-232 interface.)
11. Use the arrow keys to move the cursor to the [Handshaking] box.
12. Press one of the soft keys from [Off:Off] to [CS:RS] to select the handshaking.
Selecting the Address
(This setting is valid for the RS-422/485 interface and the Modbus protocol.)
13. Use the arrow keys to move the cursor to the [Address] box.
14. Press one of the soft keys from [1] to [32] to select the address.
Selecting the Protocol
15. Use the arrow keys to move the cursor to the [Protocol] box.
16. Press one of the soft keys from [Normal] to [Ladder] to select the baud rate.
The display varies depending on the options you specified at the time of
purchase.
or
3.5 Configuring the Serial Interface
- DAQSTATION CX1000/CX2000 1
- Communication Interface 1
- 6th Edition : June 2010 (YK) 2
- Trademarks 3
- Revisions 3
- Safety Precautions 4
- Exemption from Responsibility 5
- How to Use This Manual 6
- Using the Operation Keys 8
- Rear Panel 9
- The parameter box containing 10
- The setup item boxes that 11
- Contents 12
- Chapter 3 Serial Interface 13
- Chapter 4 Modbus Protocol 13
- Chapter 6 Command 14
- Chapter 7 Response 15
- Chapter 8 Status Reports 16
- Appendix 17
- E-mail Transmission 19
- Web Server 20
- FTP Client 21
- FTP Server 22
- Setting/Measurement Server 23
- Maintenance/Test Server 23
- Instrument Information Server 23
- DAQSTANDARD for CX 24
- Other Functions 25
- Green Series Communications 26
- Load Data 27
- Modbus master 27
- Modbus slave device 27
- Serial communications 27
- Modbus Slave 28
- Communication with PCs 30
- Basic Specifications 31
- user’s manual IM 35
- (Rear panel) 39
- Indicator 39
- IM04L31A01-03E 41
- IM04L31A01-01E 42
- 2.6 FTP Test 46
- Ethernet Communications 47
- Log Screens 52
- CX1000 Web setting display 58
- Refresh the data 62
- Select the log 63
- 2-34 IM 04L31A01-17E 64
- Web Browser Operation 64
- Contents of the Operator Page 64
- CX2000 screen example 64
- 2.12 E-mail Transmission Test 77
- Switch Communication Buffer 80
- RS-232 Specifications 81
- RS-422/485 Specifications 81
- Connection Procedure 82
- Handshaking 83
- Interface 85
- (for a four-wire system) 88
- Memory out) setting display 91
- Communication input 100
- 04L31A01-03E 101
- 04L31A01-01E 102
- IM 04L31A01-03E 102
- Operation Keys” on page ix 103
- Master Function 105
- IM 04L31A01-17E 106
- Command Message Construction 107
- Broadcast Request 108
- Function Code 108
- Message Format for Errors 110
- Response Error Codes 110
- Specifications 111
- RS-485 communications 112
- CX CX CX 112
- Address NO 112
- 5.3 Communications with PLCs 115
- Response 116
- Response When Errors Occur 117
- 5-8 IM 04L31A01-17E 118
- (F3RZ81-0N, F3RZ91-0N) 118
- 5-10 IM 04L31A01-17E 120
- Ladder Communication Protocol 121
- 5-14 IM 04L31A01-17E 124
- Program Example 124
- 5-16 IM 04L31A01-17E 126
- 5-18 IM 04L31A01-17E 128
- 6.1 Command Syntax 130
- 6.2 A List of Commands 133
- 6-6 IM 04L31A01-17E 135
- Control Commands 139
- Output Commands (Measurement) 139
- Output Commands (Control) 140
- 6-12 IM 04L31A01-17E 141
- 6.3 Input Range Parameter 142
- Control Input Range 144
- CR Set the control range 144
- MP Control setting range 145
- 6-18 IM 04L31A01-17E 147
- Control Group Setting 148
- GG Sets the control group 148
- HD Sets the derivative time 148
- Query PW[ p1]? 150
- 6-22 IM 04L31A01-17E 151
- 6-24 IM 04L31A01-17E 153
- When set to DIO-11 153
- When set to DIO-12 or DIO-12P 153
- 6-26 IM 04L31A01-17E 155
- 6.5 Setting Commands 156
- (Measurement) 156
- 6-28 IM 04L31A01-17E 157
- SD Sets the date and time 159
- SZ Sets the zone 159
- SY Sets the 4 screen display 162
- (CX2000 only) 162
- SU Sets the USER key 162
- 6.6 Setting Commands 165
- (Operation) 165
- 6-38 IM 04L31A01-17E 167
- 6.7 Basic Setting Commands 169
- XR Sets the remote action 171
- XQ Sets the timer 171
- RO Sets the report type and 171
- RM Sets the report channel 172
- 6-44 IM 04L31A01-17E 173
- 6-48 IM 04L31A01-17E 177
- 6.8 Basic Setting Commands 178
- (Control) 178
- MK Burnout settings 179
- HR Sets the RJC 179
- MJ Sets the RJC 179
- GT Registers contact inputs 179
- 6-52 IM 04L31A01-17E 181
- 6.9 Control Commands 183
- FF Outputs FIFO data 185
- MO Outputs TLOG data, manual 187
- 6.12 Output Commands 188
- (Measurement-RS-422/485 188
- Dedicated Commands) 188
- 6.13 Output Commands 188
- 6-60 IM 04L31A01-17E 189
- FV Outputs the status of the 190
- 6-62 IM 04L31A01-17E 191
- 7.1 Response Syntax 193
- ASCII Output 194
- BINARY Output 194
- 7.1 Response Syntax 195
- Identifier 195
- (1) (2) (3) (4) 196
- SP Number and PID Number 202
- Control Mode Output 203
- Program Operatin Mode Output 204
- 101112131415 206
- Communication Log 207
- Web Operation Log 211
- E-mail Log 212
- Alarm Summary 213
- Message Summary 214
- Status Information 214
- File List 215
- Data List 216
- User Level 217
- Output Example 231
- Communication Function 234
- 9.3 Setting the Modbus Master 238
- CX1000 Basic setting display 243
- (when Comm. is set to On) 243
- Controller address 255
- Detail codeStatus lamp 255
- Communication condition 255
- 9.8 Starting the Operation 257
- Display Data Example 261
- App-4 IM 04L31A01-17E 263
- Overview of the FIFO Buffer 265
- App-8 IM 04L31A01-17E 267
- • Hold Registers 268
- Parameters Related to Loop 1 270
- App-12 IM 04L31A01-17E 271
- App-14 IM 04L31A01-17E 273
- Parameters Related to Loop 2 273
- Parameters Related to Loop 3 274
- App-16 IM 04L31A01-17E 275
- Parameters Related to Loop 4 275
- Parameters Related to Loop 5 276
- App-18 IM 04L31A01-17E 277
- Parameters Related to Loop 6 277
- • Program Control Parameters 279
- App-22 IM 04L31A01-17E 281
- App-24 IM 04L31A01-17E 283
- • Input Registers 284
- High byte Low byte 285
- App-28 IM 04L31A01-17E 287
- App-30 IM 04L31A01-17E 289
- App-34 IM 04L31A01-17E 293
- App-36 IM 04L31A01-17E 295
- App-38 IM 04L31A01-17E 297
- App-42 IM 04L31A01-17E 301
- App-44 IM 04L31A01-17E 303
- • Read-only Parameters 304
- App-46 IM 04L31A01-17E 305
- App-48 IM 04L31A01-17E 307
- IM 04L31A01-01E 308
- Operation Errors 309
- Appendix 7 Messages 310
- App-52 IM 04L31A01-17E 311
- • Other Communication Errors 314
- • Status Messages 314
- Appendix 8 Login Procedure 315
- Index-2 IM 04L31A01-17E 318
- Index-4 IM 04L31A01-17E 320
Relacionado con productos y manuales para Sensores Yokogawa Data Acquisition with PID Control CX2000
Sensores Yokogawa Standalone MW100 Manual de usuario
(17 paginas)
(17 paginas)
Sensores Yokogawa Standalone MW100 Manual de usuario
(31 paginas)
(31 paginas)
Sensores Yokogawa Standalone MW100 Manual de usuario
(40 paginas)
(40 paginas)
Sensores Yokogawa PC-Based MX100 Manual de usuario
(12 paginas)
(12 paginas)
Sensores Yokogawa Standalone MW100 Manual de usuario
(58 paginas)
(58 paginas)
Sensores Yokogawa Standalone MW100 Manual de usuario
(131 paginas)
(131 paginas)
Sensores Yokogawa Standalone MW100 Manual de usuario
(305 paginas)
(305 paginas)
Sensores Yokogawa PC-Based MX100 Manual de usuario
(76 paginas)
(76 paginas)
Sensores Yokogawa PC-Based MX100 Manual de usuario
(189 paginas)
(189 paginas)
Sensores Yokogawa PC-Based MX100 Manual de usuario
(53 paginas)
(53 paginas)
Sensores Yokogawa PC-Based MX100 Manual de usuario
(133 paginas)
(133 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales