Yokogawa Standalone MW100 Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 31
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
30
IM CA150E
If all the settings match on the Summary page, click Finish to save the con guration in the IAP.
The IAP will then ask to be rebooted so all the settings can take effect. Once the IAP is rebooted, the DigiOne IAP and attached
SLC 504 can now be added as an Ethernet Device (add driver) in RSLinx
®
(use the IP address of the IAP as the IP address for
the Ethernet Device).
Note, when using RSLogix 500
®
with the IAP, it is necessary for the PLC to have its key turned to program mode to download
the existing program from the PLC to the PC.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31

Comentarios a estos manuales

Sin comentarios