Yokogawa DA100 Manual de usuario Pagina 12
- Pagina / 105
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
2-2
IM DA100-11E
2.1 Description of Functions
Commands Applicable to RS-232-C Only
The following commands are only applicable to RS-232-C.
ESC T Trigger execution
[Syntax] ESC T <terminator>
[Description] Before sending this command, select output data by TS command. Data selected
by TS command will be prepared for output and output will be executed using the
FM, LF, CF, RF or VF command.
ESC S Status byte output command
[Syntax] ESC S <terminator>
[Description] The status of the corresponding command will be output.
Note
• ESC corresponds to hexadecimal code (1B)H.
Status Byte Format
When the status byte output command (ESC S) is received, the status output will occur as shown
below.
ER
CrLf
An ASCII character string of a numeral (numerals) shown
in parentheses at the end of any of the following items or
the sum of the numerals of the relevant items is output.
For example, if syntax error and timer operation occur,
ER06CrLf is output.
• A/D conversion end (1)
When an A/D conversion for measured data ends, “1” is output.
• Syntax error (2)
If an error occurs in the description of a command, “2” is output.
• Internal timer or time when hourly, daily and monthly reports are created(4)
If any of the 6 timers (1 to 6) or the time for hourly, daily and monthly reports arrives set with an
auxiliary mask operates, “4” is output.
• Measurement release is generated (32)
When measurement release is generated while computation is in progress, “32” is output.
Items Applicable to RS-232-C Only
With RS-232-C, all commands can be acknowledged by ACK output. The ACK output is as follows,
except for the FM, LF, CF, RF, Bland, VF commands, whose ACK output will described later on.
E0 : Commands are processed succesfully
E1 : Commands are not processed succesfully
After having sent the output request, make sure to retrieve the data.
- Instruction 1
- Data Acquisition Unit 1
- Communication Interface 1
- Introduction 2
- Trademark 2
- TABLE OF CONTENTS 4
- CHAPTER 7 OUTPUT FORMAT 5
- CHAPTER 8 SAMPLE PROGRAM 5
- APPENDIX 6
- Rotary switch with 9
- Address is the numeral 9
- 1.3 Specifications 10
- Listener and Talker Functions 11
- Status Byte Format 12
- 2.2 Specifications 13
- Host Computer 14
- 2.5 Communication Data Format 18
- 3.2 Specifications 21
- Cable Used 22
- Connecting the Cable 22
- Converter 25
- Terminator 25
- Minimum Response Time 26
- 3.4 Communication Data Format 27
- Procedure 28
- Connecting to the Network 30
- About the Ports 30
- Communication Operation 31
- 4.2 Specifications 32
- Setting the Dip Switch 33
- LED Indication 33
- 4.4 Setting the IP Address 35
- 4.5 Connection Methods 36
- DA100's IP address 41
- <Enter> 41
- 4.9 Setting the Timeout 42
- 5.1 Command Format 43
- 5.2 Command Syntax 45
- Channel/relay No 46
- 5.4 Command List 47
- 5.5 Input Range Parameter 48
- RATE RATE 0 to 30000 50
- GATE GATE 0 to 30000 50
- Command Format 51
- 5.5 Input Range Parameter 51
- 5.6 ASCII Code Table 52
- 6.1 Setting Command 53
- 6.1 Setting Command 54
- Setting the strain input 54
- Setting the pulse input 54
- Setting Scaling 54
- SN Sets the scaling unit 55
- SA Sets the alarm 55
- SL Sets an event/action 57
- Commands 59
- XT Sets the temperature unit 61
- 6.2 Control Execution 62
- 6.3 Data Output 64
- Request Command 64
- 7.1 Functions as Talker 66
- Expandable model: A01 to A60 67
- Position 71
- 7.9 Report Output Format 74
- Daily Report 76
- 7.9 Report Output Format 77
- Monthly Report 78
- 8.1 GP-IB Sample Programs 82
- 8.2 RS-232-C Sample Programs 85
- Output the Setting Data 88
- Sample Program 90
- 8.4 Ethernet Program 94
- App.1 Computing Equation 96
- Computation start 98
- Computation stop 98
- Computation clear & start 98
- Computed data 98
- Measurement interval 99
- Computation 99
- App. 2 Report Function 100
- IM DA100-11E 101
Relacionado con productos y manuales para Sensores Yokogawa DA100
Sensores Yokogawa DA100 Manual de usuario
(6 paginas)
(6 paginas)
Sensores Yokogawa DA100 Manual de usuario
(109 paginas)
(109 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(65 paginas)
(65 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(83 paginas)
(83 paginas)
Sensores Yokogawa µR10000 Manual de usuario
(9 paginas)
(9 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(94 paginas)
(94 paginas)
Sensores Yokogawa µR10000 Manual de usuario
(56 paginas)
(56 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(103 paginas)
(103 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(9 paginas)
(9 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(59 paginas)
(59 paginas)
Sensores Yokogawa DR240 Manual de usuario
(3 paginas)
(3 paginas)
Sensores Yokogawa µR10000 Manual de usuario
(263 paginas)
(263 paginas)
Sensores Yokogawa DR240 Manual de usuario
(5 paginas)
(5 paginas)
Sensores Yokogawa DR240 Manual de usuario
(121 paginas)
(121 paginas)
Sensores Yokogawa µR20000 Manual de usuario
(263 paginas)
(263 paginas)
Sensores Yokogawa DR240 Manual de usuario
(293 paginas)
(293 paginas)
Sensores Yokogawa JUXTA VJSS Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales