search

Yokogawa JUXTA M Series Digital Limit Alarms MVTK Manual de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
<Toc> <Ind> <4. Ladder Communication >
4-5
IM 77J04J11-01E 1st Edition : 2006.08.25-00
4.2.4 Response Error Codes
Data that the master station (PLC) will receive in the event of an error and the description of
errors are given in the table below.
0101/0103/0000/0001/CR/LF
Read/write data
0, 0, R/W, and +/-
Parameter number
Address number and CPU number
Note: Slashes (/) in the following send and receive data examples are used for explanatory purposes only, and are not part of
the actual data string.
Table 4-2 List of Error Codes
A non-existent parameter was set. 0101/0451/0000/0001/CR/LF 0101/0451/0000/FFFF/CR/LF
0101/0420/0000/000B/CR/LF
0101/0420/000B/0000/CR/LF
0101/0420/0B00/0000/CR/LF
0101/042B/0000/0000/CR/LF
0101/FFFF/FFFF/FFFF/CR/LFCharacters other than a BCD code (0 to 9)
were used other than in an address number.
* This excludes LF (0A).
0101/0420/0000/000A/CR/LF
0101/0420/000A/0000/CR/LF
0101/0420/0A00/0000/CR/LF
0101/040A/0000/0000/CR/LF
No responseAn LF code (0A) was used other than in
an address number.
0103/0420/0000/0000/CR/LF
0001/0420/0000/0000/CR/LF
3301/0420/0000/0000/CR/LF
An address differed from the address
numbers of the M Series.
* In the example at right, none of the address numbers exist.
No response
0101/0420/0000/00/CR/LF
0101/0420/0/CR/LF
0101/0/CR/LF
No responseThe command length (length of the send
data) is incorrect.
* The command length, including CR and LF, must be 10 bytes.
0101/012 No responseA timeout occurred during communication.
* Timeout is 2 seconds.
–
The buffer overflowed.
* This error occurs when the buffer overflow exceeds 368 bytes.
No response
–A framing error or a parity error occurred. No response
Description of Error
Example of Data Sent
by Master Station
Data Received
by Master Station
FFFF is returned.
CAUTION
If a parameter not existing in the D register table is read, an error will not occur. In this
case, 0 will be returned instead.
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Sensores Yokogawa JUXTA M Series Digital Limit Alarms MVTK
Sensores Yokogawa JUXTA FA4V Distributor (Non-isolated) Manual de usuario   (3 paginas)
Sensores Yokogawa JUXTA FH2V Isolator (Free Range Type) Manual de usuario   (4 paginas)
Sensores Yokogawa JUXTA FA5V Distributor (with Square Root Extractor Manual de usuario   (4 paginas)
Sensores Yokogawa JUXTA FH5V Isolator (with Square Root Extractor) Manual de usuario   (4 paginas)
Sensores Yokogawa JUXTA FM1V Isolator (mV DC Input, Free Range Type) Manual de usuario   (4 paginas)
Sensores Yokogawa JUXTA FR5V RTD Converter (Free Range Type) Manual de usuario   (4 paginas)
Sensores Yokogawa JUXTA FS1V Potentiometer Converter Manual de usuario   (4 paginas)
Sensores Yokogawa JUXTA FT5V Thermocouple Converter (Free Range Type Manual de usuario   (4 paginas)
  • Dickinson BYD Movistar WiDrive Grainsystems
  • Radio Shack Equipo musical Jabra Cargadores De Bateria Asus Videojuegos Y Consolas EdgeStar Filtros de aire CLUB3D Splitters De Vídeo
  • Creative DC-CAM 3000Z Sony ICF-SW77 Aeg-Electrolux CG6600 AEG B8920-1-M
  • Kohler K-596-CP Manual de instrucciones Vtech CS5121-3 Manual de usuario Sony NEX-5R Manual de usuario LG WD100CV Manual de usuario Sony M-560V Manual de usuario