Yokogawa Removable Chassis DX1000N Manual de usuario descargar pdf (Pagina 43)

2-13

IM 04L41B01-04E

Advanced Settings of Screen and Component

App

Index

List of Attributes

Attribute Description Default value

ID Number automatically assigned for component identification. 88 to 91

Batch group no

only with additional

spec. /BT2

Set the batch group number. The batch number needs to

be between [1] and number of Multi batch configured at the

basic settings.

The batch group number will be displayed only when Multi

batch is valid.

Group no Set the group number.

Multi batch Off

You can select a number from [1] to [10] for DX1000, and [1]

to [36] for DX2000.

Multi batch On

You can select a number from [1] to [6] for DX1000, and [1]

to [12] for DX2000.

Kind Set the scale kind.

[Of

f]:The

valueisnotdisplayed.

[On]:Scalevalueswillbedisplayedbythenumberof

partitions configured, at previously defined intervals.

[Bitmap]: Use a bitmap image for the scale. If files specified

under [Bmp filename] cannot be loaded, the scale

thescale

isdisplayedwiththekindsettoOff.

Trend direction Set the direction of a wave. You can select [SET], [Horizon],

or [Vertical].

SET

Form Set the size of SCALE. You can select either [Small] or

[Large].

Small

Bmp filename Enter the name of a bitmap file saved on an external

storage medium (CF card).

The read destination is the directory used when the screen

was loaded.

Bitmap.bmp

Indicator Set how the current value is displayed.

You can select [SET], [Mark], or [Bar].

Note that this field will not be available when the type is set

to[Off].

SET

Indicator type Set the indicator format to [Normal], [Micro], [Small], or

[Balanced].

See“Partsofthecomponentandindicatortypes”onpage

2-12.

Normal

Digit Set the number of digits for the value displayed at the scale.

You can select [SET], [Normal], or [Fine].

Youcan

setthisfieldonlywhentheKindissetto[On].

SET

Margin Sets whether or not to display a margin on both sides in the

direction of the span.

[On]:Displaya

marginof3%ofcomponentwidth(orheight)

in the direction of the scale

[Off]:Margin

notdisplayed

Off

Change group Sets whether or not to switch the group display in the

execution panel when the left/right keys are pressed.

[On]:Display

switched[Off]:Displaynotswitched

Alarm mark

display

Set how the alarm set-point mark is displayed.

Youcan

select[On],[Off],or[SET].

SET

Alarm mark Set the type of alarm set-point mark.

You can select [Alarm], [Fixed], or [SET].

SET

Unit Selects whether or not to display the units.

[On]:

Units

displayed[Off]:Unitsnotdisplayed

2nd span You can choose to validate or invalidate the 2nd span by

setting[On]

or[Off].

See Section 2.2.

Off

2nd span Lower Enter

a

valuebetween0.0%forthelowerlimitand100.0%

for the upper limit. In this case, the difference between the

twospansneedstobe10.0%orgreater.

See Section 2.2

0.0

Continued on next page

2.6 Attributes of Scale Components

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 111 112

Comentarios a estos manuales

Sin comentarios

Yokogawa Removable Chassis DX1000N Manual de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Yokogawa Removable Chassis DX1000N