Yokogawa Data Acquisition with PID Control CX2000 Manual de usuario descargar pdf (Pagina 61)

3-45

M-4659

Configuring the DX1000/DX2000

Index

E-mail

Set the SMTP server and mail address.

• SMTP server name

Enter the host name or IP address of the SMTP server.

• Port No.

Unless specied otherwise, set the number to the default value. The default value is

25.

• Address 1, Address 2

Enter the e-mail address. Multiple e-mail addresses can be entered in the box of one

recipient. When entering multiple addresses, delimit each address with a space. Up

to 150 characters can be entered.

• Sender

Enter the sender e-mail address. You can enter up to 64 characters.

Alarm

Specify the settings for sending e-mail when alarms occur.

• Recipient1 and Recipient2

Set the e-mail recipients. For Recipient1 and Recipient2, select [ON] to send e-mail

or [OFF] to not send e-mail.

• Active alarms

Sends an e-mail when an alarm occurs. You can select [ON] (send e-mail) or [OFF] (not

send e-mail) for alarms 1 to 4.

• Include INST

Select [ON] to attach instantaneous value data when the alarm occurred.

• Include source URL

Select [ON] to attach the source URL. Attach the URL when the Web server is

enabled.

• Subject

Enter the subject of the e-mail using up to 32 alphanumeric characters. The default

setting is Alarm_summary.

• Header1, Header2

Enter header 1 and header 2 using up to 64 characters.

3.6 Entering Basic Settings

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 285 286

Sin comentarios

Yokogawa Data Acquisition with PID Control CX2000 Manual de usuario Pagina 61