Yokogawa DAQWORX Manual de usuario descargar pdf (Pagina 159)

5-5

IM WX103-01E

Index

Troubleshooting

5.2 Error Messages and Their Corrective Actions

Error Messages on the Logger

Code Message Corrective Action/Description Reference Page

– Undetermined Directory. The save destination of the record file cannot be found.

Check whether the save destination exists.

2-11

E5501 Recording or Working. Try again once recording stops. 1-22

E5502 Cannot open file.Check viewer. If a dialog box is open in the Viewer, close it. –

E5503 It failed in acquisition of CF

information. Please verify the usage

condition of the equipment

Check whether the host name is correct, and whether the

main unit is connected.

2-6

E5504 Failed to get channel and network

configuration.

Check the disk capacity and whether the file system is

correct.

2-6

E5505 Failed to get information. Check

connecting MX.

Check the disk capacity and whether the file system is

correct.

2-6

E5506 Failed to create folder. Check the disk capacity and whether the file system is

correct.

–

E5507 Invalid folder name.

Please enter a new name.

Specify a valid folder name. –

E5508 Cannot contain any of the following

characters:\n \\ / : , ; * ? " < > |\nCON

PRN AUX CLOCK$ NUL COM1-9

LPT1-9

Use characters other than the following: “ \\ /: , ; * ? " < >

|CON PRN AUX CLOCK$ NUL COM1-9 LPT1-9”

–

W5531

The current channel setup contains

invalid use of reference channels.

Channels whose mode is set to RRJC.

Channels used for difference input.

Transmission AO channels.

Transmission PWM channels.

Do you wish to continue after

disabling the invalid channels?

Click No and change the settings of inappropriate

channels.

To disable the inappropriate channels, click Yes.

2-20 to 2-23

W5532 In order to balance the strain

channels, it’s necessary for channels

to be set up correctly.

The current channel setup contains

invalid use of reference channels.

Some measurement channels set to

RRJC mode.

Channels used for difference input.

Transmission AO channels.

Transmission PWM channels.

Do you wish to continue after

disabling the invalid channels?

Click No and change the settings of inappropriate

channels.

To disable the inappropriate channels, click Yes.

2-20 to 2-23

W5533 Invalid modules exist. do you get

configuration after reconstructing?

Click OK to reconfigure the system based on the

information acquired from the main unit.

1-6

M5561 Stop record? Click OK to stop recording. 2-74

M5562 Stop monitoring and quit? Click OK to stop acquisition. 2-76

M5563 Assign all modules to appropriate

measuring groups?

Click OK to assign automatically. 1-6

M5564 Please wait until writing of data is finished. –

M5565 Restart the monitor server to apply the changed port

number.

2-79

M5566 State: Active

Max.: □□□ bytes

Free: □□□ bytes

– 2-9

M5567 Check whether the CF card is formatted. –

M5568 Insert a CF card. *

M5569 Apply the edited network

configuration of MXs?

Click OK to send settings. 2-3

M5570 Modules of Slot□ - Slot□ will be

changed. Ok to continue?

Click OK to change the specified module. Cancel to return

to the previous screen.

2-6

* See the MX100 User’s Manual (IM MX100-01E).

1 2 ... 154 155 156 157 158 159 160 161 162 163

Comentarios a estos manuales

Sin comentarios

Yokogawa DAQWORX Manual de usuario Pagina 159

Comentarios a estos manuales

Relacionado con productos y manuales para Software Yokogawa DAQWORX