Yokogawa EJX210B Manual de usuario descargar pdf (Pagina 31)

100

101

<7. Operation>

7-3

IM 01C27C01-01EN

7.3 Starting Operation

After completing the zero point adjustment, follow

the procedure below to start operation.

1) Conrm the operating status.

2) After conrming the operating status, perform

the following:

IMPORTANT

• Close the terminal box cover and the

amplier cover. Screw each cover in tightly

until it will not turn further.

• Tighten the zero-adjustment cover mounting

screw to x the cover in position.

7.4 Connecting to the Field

Wireless Network

■ Preparation work prior to connecting to a

eld wireless network

This transmitter does not need to be connected

with a physical wire. Instead of physical wiring, it

is necessary to set the eld wireless devices to

communicate with before installing the transmitter.

This procedure is called a provisioning.

This transmitter supports provisioning via infrared

communication using a provisioning device and

can be securely connected to a network. If the

provisioning information is not set, the transmitter

cannot be connected to the eld wireless network.

Provisioning:

Provisioning is work to set the security and

network information to enable the transmitter

to be connected to the eld wireless network.

This transmitter supports a provisioning method

using infrared communication.

For details on provisioning using a provisioning

device, and procedure for connecting the

transmitter to the Field Wireless Network, refer

to the User’s Manual, FieldMate Versatile Device

Management Wizard (IM 01R01A01-01E),

YFGW710 Field Wireless Integrated Gateway (IM

01W01F01-01EN) and YFGW410 Field Wireless

Management Station (IM 01W02D01-01EN).

F0704.ai

within 30cm

Figure 7.4 Provisioning Example

■ Provisioning work

This subsection describes provisioning work using

FieldMate as the provisioning device.

Provisioning work performs provisioning for each

eld wireless device using FieldMate and an

infrared adapter. If use Yokogawa-recommended

infrared device for provisioning, set distance

between the glass window surface to the infrared

device within 30cm.

For details of Yokogawa-recommended infrared

device, refer to subsection 9.2 “Calibration

Instruments Selection”.

Perform the following provisioning tasks.

• Setting provisioning information

• Creating a provisioning information le

1) Setting provisioning information

Set the device tag and network ID using a

FieldMate provisioning function. The device

tag, network ID, and join key are set in the eld

wireless device. It is not necessary to input

a join key because FieldMate automatically

generates it.

Setting device tag

The device tag is used for the user to

recognize the eld wireless device.

Setting network ID

This is the network ID for the eld wireless

network to which the eld wireless device is

connected. Set a value from 2 to 65535.

The eld wireless device is connected to the

eld wireless network corresponding to the

network ID set by provisioning work.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 100 101

Comentarios a estos manuales

Sin comentarios

Yokogawa EJX210B Manual de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Yokogawa EJX210B