Yokogawa DAQWORX Manual de usuario descargar pdf (Pagina 163)

6-36

IM WX104-01E

Detail Setting

• Tag

Settings Description

Tag Displays tags or tag numbers. Channel numbers are displayed for

channels that do not have tags or tag numbers assigned to them.

Channel Displays channel numbers.

• Tag No. (Release number 3 or later)

Select [ON] to use tag numbers.

• Language

Select the display language

• Remote controller ID

Select the remote controller ID from 0 to 31. When not using the remote control

terminal, select [OFF].

• Decimal Point Type (Release number 3 or later)

You can set the decimal point type for the display and les saved in text format. You

can select [Point] or [Comma].

• Menu display (Release number 3 or later)

To display [Basic setting mode] (menu item for switching to basic setting mode) in the

setting mode menu, select [ON].

• Batch

Batch (when the multi batch function is not installed)

Select [ON] to use the batch function.

Batch operation qty (when the /BT2 multi batch function is installed;

release number 3 or later)

Specify the number of batches to use.

Settings Description

OFF Disables the multi batch function and the batch function.

1 Enables the single batch function.

2 or higher Enables the multi batch function. The table below shows the number of

batches supported by the DX1000 and DX2000.

Model Number of Batches Supported

DX1000 2 to 6

DX2000 (standard memory model) 2 to 6

DX2000 (large memory model) 2 to 12

6.5 Entering Basic Settings

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 335 336

Sin comentarios

Yokogawa DAQWORX Manual de usuario Pagina 163