Yokogawa DAQWORX Manual de usuario descargar pdf (Pagina 260)

8-3

IM WX104-01E

Index

Configuring the CX1000/CX2000

• Option

The following options can be selected if you set the style to Style2 or earlier. They are

not available on Style 3 or later, because they are equipped as standard.

• Green Series Comm

Select whether a communication option with an external Green Series controller is

available. This option is valid only when [Serial] is set to [RS-232] or [RS-422/485].

If [LOOP] is set to [0LOOP], the option is xed to [Green Series Comm].

•

Ladder Comm

Select

whether a ladder communication option is available. This option is valid only

when [Serial] is set to [RS-232] or [RS-422/485].

This option is invalid if [LOOP] is set to [0LOOP].

• Remote

Select whether a remote option is available. This option is valid only when [Alarm

Relay] is set to [4p+With Fail/Mem. End] or [6p].

•

Program

Select the program control option: [None], [Program Num#:4], or [Program Num#:30].

If the system conguration is changed and the [OK] button is clicked, a message

“System Conguration is changed Input&Data are Initialized” appears. Click the [OK]

button to initialize the data.

Note

In the procedure for the System Configuration dialog box, make sure that the CX tab is selected

before entering settings. If the DX tab is selected, the settings you enter will apply only to those

instruments.

Select [File]-[New] to create

new setup data from the second time.

Create the setup data according to step 2 and 3.

Opening the CX Configurator by Loading Existing Setup Data

Select [Open] from the [File] menu on the CX Configurator, specify the location of the

setup data file in the [Open] dialog box, and open the CX Configurator.

2. The [Open] dialog box opens.

1. Click the open file button or

[Open] on the [File] menu.

Select a file with .pcl extension

and click here.

8.1 Starting the Hardware Configurator (Opening the Hardware Configurator Window)

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 335 336

Sin comentarios

Yokogawa DAQWORX Manual de usuario Pagina 260