Yokogawa DAQWORX Manual de usuario descargar pdf (Pagina 26)

2-7

IM WX104-01E

Index

Using the DAQ Desktop

When the Multibatch Function Is Included

Select one item for recording or math start,

fill in the text boxes, then click the Start button.

Shows the batch information set on

the DX1000/DX2000 (release number 3 or later)

Green indicates batches that have started

Shows the batch number

Shows the lot number

After selecting the batch number or computation to start, enter the batch number,

lot number, and comments if necessary. If you select individual batch numbers and

computations before clicking either the Memory & Math Start, Memory Start, or Math

Start button, these items will be much clearer.

Batch No.:

Up to 32 alphanumeric and the following characters can be entered: %()+-.

°_@[].

Square brackets [ ] can be used with DX1000/DX2000 release 3 or later.

Lot No.: Up to 8 alphanumeric characters can be entered. The number of

characters that can be entered depends on the number of digits of the lot

number set on the DX/MV/CX.

Comment:

Up to 50 characters per line can be input. Alphanumerics and some

symbols can be entered.

Note

• If starting and stopping is carried out on the DX/MV/CX, and in other cases, the start/stop

status display may not be correct.

• If the Batch function is ON, batch information cannot be input when the connected

instrument has started memory sampling. Also, the Memory & Math Stop and Memory Stop

buttons are not available.

2.2 Starting and Stopping Data Acquisition on the DX/MV/CX, Send a Trigger

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 335 336

Sin comentarios

Yokogawa DAQWORX Manual de usuario Pagina 26